How To Shock A Pool With Bleach. In this video i show what happened when i waited too long to put my winter cover on the pool. Only hth is acceptable for purifying your water.
Calcium hypochlorite) using a $3 one pound bag that will yield 75 gallons at $0.04 per g. You can do this using a commercial product, which works well on freeing the chlorine that has produced compounds with contaminants. Let the chlorine sit for 5 minutes, and then test the ph level of the pool.
Shocking a pool requires increasing the chlorine to 5 parts per million.
In this video i show what happened when i waited too long to put my winter cover on the pool. At a 12.5% concentrate, liquid pool shock is approximately 2x's stronger than clorox bleach. To make a bleach solution which approximates the strength of regular bleach concentrated at ~ 6% (sodium hypochlorite), use the following formula:
Let the chlorine sit for 5 minutes, and then test the ph level of the pool.
It is easy to use bleach for a pool shock. Pool shock with 73% calcium hypochlorite (70% available chlorine) mix one heaping teaspoon (1/4 oz.) of pool shock into 2 gallons of water to make bleach. Calcium hypochlorite) using a $3 one pound bag that will yield 75 gallons at $0.04 per g.
The good news is, you can make your own bleach with granular calcium hypochlorite, the primary component of typical pool shock.
However, if you want to bleach 1000 gallons of pool water, you’ll need (1000*½)/10000 which is equal to 0.05 gallons of bleach. I have used this method in the past as well and if you follow the proper steps, it. When you are using the bleach method in keeping your swimming pool sanitized, knowing your cya levels are very important as well.
If you need to calculate how much bleach or clorox you need to shock your pool, you will have to use 1/2 gallon of bleach per 10,000 gallons of water to raise the chlorine levels by 5 ppm.
Shocking the pool with bleach. Making bleach on demand from pool treatment chemicals (pool shock: What type of pool is easiest to maintain?
This means you need 1/2 gallon of bleach for every 10,000 gallons of pool water.
The most recommended bleach product to use is clorox as it has a concentration of 5.7%. The purpose of shocking a pool with bleach is to boost the concentration of free chlorine. Compute the volume of water in your pool.